Mechanical installation
Storage
Preparation
4
13
BA 12.0028−EN 6.0
4 Mechanical installation
Danger!
Only transport the drive with transport equipment or hoists which are suitable
for this load. Ensure a safe fixing. Avoid shocks!
4.1 Storage
If you do not install the gearbox immediately, ensure appropriate conditions of storage.
ƒ Up to one year:
– Without special measures in dry, dust−free rooms which are protected against
sunlight.
– Store the gearbox with ventilation such that the breather screw is located at the
top.
– Shafts and bright surfaces are delivered with protection against corrosion.
ƒ More than one year:
– Please contact Lenze.
4.2 Mounting
4.2.1 Preparation
Thoroughly remove anticorrosion agents from output shafts and flange faces.
To Next Page
Loading...
Need help?
General
