Lenze 8100 A Series User Manual

Technical description 8100_A
25
I
I
I
5. OPERATIONG AND DISPLAY
5.1 OPERATING UNIT 810288 (OPTION)
The two-line LCD operating unit 8102BB (part no. 347642) can be installed as
option. This operating and display unit is used to set the parameters of the frequency
inverters directly at the device. The operating unit is not supplied with the inverter.
Plugging and removing of the operating unit is only possible when the controller is
switched off.
Display
Lenze 8100
Inverter
RDY 0
Imax 0
IMP 0
Healthy (LED green)
clamp current reached (LED red)
Pulse inhibit (LED yellow)
Keys
Key functions
Display
Position of arrow marks the activated level Icode-/parameter level)
Code.
Parameter. . Unit
Example
t Explanatory text for each code and
parameter
lenze
Key
Function
PRG
Change between code and parameter level
SH + PRG
To confirm parameter change
.. Increase displayed value
.. + SH
Increase displayed value fast
.
Reduce displayed value
. + SH
Reduce displayed value fast
STP
Inhibit controller
SH + STP Enable controller
C 0 5 0
....
o . 0
H z
f d A c
t u
a 1
v a 1 u e

Lenze 8100 A Series Specifications

General

Brand	Lenze
Model	8100 A Series
Category	DC Drives
Language	English