Maintenance
Repair
Mount the PC housing
7
103
LDCDS−ELx7xx DE/EN 4.0
Without DVD drive
3
0
1
1
2
ELx7xx−016
1. Mount the housing :
– Carefully place the housing on the housing base.
– Screw in the four screws .
2. Only for fanless devices: Screw in the three screws and tighten them.
The internal heatsink must be firmly connected with the housing. Otherwise, the heat
dissipation will not suffice, and the device might be damaged.
3. Plug on the mains cable ( 87).