Safety instructions
General safety instructions
1
62
LDCDS−ELx7xx DE/EN 4.0
1.2 General safety instructions
ƒ The device must be installed and maintained by qualified, skilled personnel familiar
with the applicable national standards.
ƒ The device is classified as a class A device and can cause radio interference in
residential areas. In this case, the operator may have to take special measures. Any
costs arising from these measures have to be paid by the operator.
ƒ A touchscreen does not comply with the Ergonomics Directive ZH 1/618. This is why
it is only designed for short−time inputs and monitoring functions. For longer inputs,
connect an external keyboard.
ƒ In the event of a fault, pull out the power connector immediately and send back the
device to the manufacturer. The address can be found on the self−addressed
envelope included in this documentation. Please use the original packaging to
return the device!
ƒ Printed circuit boards which might be damaged by short circuit or electrostatic
discharge (ESD) must be handled appropriately.
ƒ The BIOS of the mainboard is configured by the factory. After the BIOS has been
updated, malfunctions are possible. Please address to our service.
ƒ To dispose of the device, disassemble it into its component parts. Recycle metal,
plastic and printed circuit boards. Observe the local regulations.
To Next Page
Loading...
Need help?
General
