About this documentation
Document history
1
5
Lenze ¯ MA 12.0012 ¯ 4.0
1 About this documentation
Contents
¯ This documentation serves for safety−relevant operations on and with the
gearboxes. It contains safety instructions which must be observed.
¯ All personnel working on and with the gearboxes must have the documentation
available during the work and observe the information and notes relevant for
them.
¯ The documentation must always be complete and in a perfectly readable state.
¯ The information in this documentation can be supplemented by further
documents, if necessary, e.g. information regarding the motors mounted,
additional components on the gearbox or motor, or with regard to gearboxes and
motors in ATEX design.
Target group
This documentation is directed at qualified skilled personnel according to IEC 60364.
Qualified skilled personnel are persons who have the required qualifications to carry out
all activities involved in installing, mounting, commissioning, and operating the
product.
Tip!
Information and tools concerning the Lenze products can be found in the
download area at
www.lenze.com
1.1 Document history
Material number Version Description
13457345 1.0 12/2013 TD09 First edition for the pilot series
13518265 2.0 08/2016 TD09 Complete revision including the g500 cast iron
gearboxes
13518265 2.1 09/2016 TD09 Supplement: Gearbox code
.\@. 4.0 01/2020 TD09 Ambient temperatures changed in the lubricant
table
.\@. 4.0 01/2020 TD09 MA g500 with three−phase AC motor and g500 with
servo motor combined
The "Temperature range" chapter has been newly
incorporated
Mounting positions designations updated
To Next Page
Loading...
Need help?
General
