Lenze G50BS113 User Manual

Surface and corrosion protecon
Depending on the ambient condions, the surface and corrosion protecon system (called
OKS) oers tailor-made soluons for opmum protecon.
Various surface coangs ensure that the motors operate reliably even at high air humidity, in
outdoor installaon or in the presence of atmospheric impuries. Any color from the "RAL
Classic" collecon can be chosen for the top coat.
The OKS-XL (extra Large) version requires a check by your responsible Lenze
subsidiary.
Surface and corrosion
protecon
Applicaons Product g500
OKS-G (primed)
•
Dependent on subsequent top coat applied Standard
OKS-S (small)
•
Standard applicaons
•
Internal installaon in heated buildings
•
Air humidity up to 90%
Oponal
OKS-M (medium)
•
Internal installaon in non-heated buildings
•
Covered, protected external installaon
•
Air humidity up to 95 %
Oponal
OKS-L (large)
•
External installaon
•
Air humidity above 95 %
•
Chemical industrial plants
•
Food industry
OKS-XL (extra Large)
•
External installaon
•
Air humidity above 95 %
•
Chemical industrial plants
•
Food industry
•
Coastal areas with moderate salinity
Surface and corrosion
protecon
Corrosivity category Surface coang Colour Coang thickness
DIN EN ISO 12944-2 Design
OKS-G (primed)
•
2K PUR priming coat 60 ... 90 µm
OKS-S (small) Comparable to C1
•
2K-PUR top coat
•
Standard: RAL 7012
•
Oponal: RAL Classic
80 ... 120 µm
OKS-M (medium) Comparable to C2
•
2K PUR priming coat
•
2K-PUR top coat
110 ... 160 µm
OKS-L (large) Comparable to C3 140 ... 200 µm
OKS-XL (extra Large) Comparable to C4
•
2K-EP priming coat (two mes)
•
2K-PUR top coat
160 ... 240 µm
Informaon on project planning
Final conguraon
Surface and corrosion protecon
31

Lenze G50BS113 Specifications

General

Brand	Lenze
Model	G50BS113
Category	Industrial Equipment
Language	English