18
Automatic Shut O
Memory Function
The humidifier will automatically turn o when all of the water in the tank has been
diused, or when a programmed timer has finished counting down. When the water
level is low the display will continue showing “ ” until more water is added to the
water tank. [Figure 6.1]
The humidifier will remember its programmed settings when turned o, and will resume
these settings when it is turned back on. Please note that the humidifier must remain
plugged in for this memory function to work.
NOTE: The memory function does not work with the built-in timer.
ON / OFF DISP LAYW ARML IGHT HUMID ITYT IMER
Figure 6.1
To Next Page
Loading...
Need help?
General
