Levoit LVAC-200 User Manual

11
Figure 3.2
Figure 3.1
CLEANING
Cleaning the Vacuum Body
Cleaning the Dust Bin &
Metal Filter
1. Turn the vacuum o.
2. Wipe the outside of the vacuum down with
a damp cloth.
3. Allow the vacuum to completely dry before
using.
1. Make sure the vacuum is o and the dust
bin is completely empty before cleaning
(see Emptying the Dust Bin, page 10).
2. Press the Dust Bin Release Button and pull
the dust bin to remove it. [Figure 3.1] Empty
out any remaining dust and debris, and
remove any hair tangled around the metal
filter.
3. Remove the pre-motor filters from the top
of the dust bin. Set aside or wash the pre-
motor filters (see Cleaning the Pre-Motor
& Post-Motor Filters, page 12).
4. Rotate the metal filter counterclockwise to
remove it. [Figure 3.2]
5. Rinse the dust bin and metal filter with water
and allow them to dry. Make sure the parts
are completely dry before using.
6. Reattach the metal filter and replace the
pre-motor filters. Attach the dust bin to the
vacuum body.
Note: Do not allow water to enter the
internal parts or motor of the vacuum.
Note: Do not allow water to enter the
internal parts or motor of the vacuum.

Levoit LVAC-200 Specifications

General

Brand	Levoit
Model	LVAC-200
Category	Vacuum Cleaner
Language	English