Levoit LVAC-200 User Manual

6
CONTROLS USING YOUR VACUUM
1. Build the vacuum stick by aligning the
dots on the long stick and short stick, then
push together until they lock in place.
[Figure 1.1]
2. Attach the vacuum head or a nozzle
attachment to the bottom of the stick, then
attach the vacuum body to the top of the
stick. [Figure 1.2]
Note: There is a clicking sound when the
parts are properly joined together.
Note: Fully charge the battery before first use.
Battery Indicator Light Chart
(During Use)
Figure 1.1
Figure 1.2
Battery Level Battery Indicators
70–100%
35–70%
10–35%
0–10%
On/O Button
• Turns on/o the vacuum.
Eco/Turbo Mode Button
• Cycles through Eco Mode and Turbo Mode.
• The vacuum will default to Eco Mode. Press
once for Turbo Mode. Press again to switch
back to Eco Mode.
• Eco Mode is suitable for daily cleaning.
• Turbo Mode is suitable for deep cleaning.
Battery Indicator Lights
• Indicate the battery level when you are
using the vacuum.
3. Charge the vacuum (see page 8).
4. Press the On/O Button to turn the vacuum
on. The vacuum will default to Eco Mode.
5. Press the Eco/Turbo Mode Button to adjust
the suction power between Eco Mode and
Turbo Mode.
6. Press the On/O Button to turn the vacuum
o.

Levoit LVAC-200 Specifications

General

Brand	Levoit
Model	LVAC-200
Category	Vacuum Cleaner
Language	English