Lexmark M5270 User Manual

Action Yes No
Step 6
a Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store
paper in its original wrapper until you are ready to use it.
b Print the document.
Is the print dark?
Go to step 7. The problem is
solved.
Step 7
a Remove, and then insert the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit
to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum under the imaging unit. Doing so may
aect the quality of future print jobs.
b Print the document.
Is the print dark?
Go to step 8. The problem is
solved.
Step 8
a Replace the imaging unit.
b Print the document.
Is the print dark?
Contact
customer
support.
The problem is
solved.
Fine lines are not printed correctly
Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to
Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press
to
navigate through the settings.
Troubleshooting 157

Lexmark M5270 Specifications

General

Print Resolution	1200 x 1200 dpi
Processor Speed	1.2 GHz
Print Technology	Laser
Standard Memory	1 GB
Maximum Memory	4 GB
Standard Input Capacity	550 sheets
Connectivity	Ethernet, USB, Wireless
Hard Disk	Option available
Recommended Monthly Page Volume	5, 000 to 50, 000 pages
Network Protocol	TCP/IP, IPv4, IPv6
Printable Area	8.5 x 14 inches
Paper Handling Input, Standard	550 sheets
Paper Handling Output, Standard	250 sheets
Media Types Supported	Card Stock, Envelopes, Paper Labels, Plain Paper, Transparencies
Media Sizes Supported	Letter, Legal, Executive, A4, A5, B5, Envelopes
Standard Ports	USB 2.0, Gigabit Ethernet
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Linux, Mac OS X
Duplex Printing	Standard