Lexmark M5270 User Manual

Printing from a mobile device using AirPrint
AirPrint is a mobile printing solution that allows you to print directly from Apple devices to an AirPrint‑certified
printer.
Notes:
• This application is supported only in some Apple devices.
• This application is supported only in some printer models.
1 From the home screen of your mobile device, launch a compatible application.
2 Select an item to print, and then tap the share icon.
3 Tap Print, and then select a printer.
4 Print the document.
Printing from a flash drive
1 Insert the flash drive.
Notes:
• If you insert the flash drive when an error message appears, then the printer ignores the flash drive.
• If you insert the flash drive while the printer is processing other print jobs, then Busy appears on the
display.
2 From the display, touch the document that you want to print.
If necessary,
configure
other print settings.
3 Send the print job.
To print another document, touch USB Drive.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the flash drive or
the printer in the area shown while actively printing, reading, or writing from the memory device.
Printing 46

Lexmark M5270 Specifications

General

Print Resolution	1200 x 1200 dpi
Processor Speed	1.2 GHz
Print Technology	Laser
Standard Memory	1 GB
Maximum Memory	4 GB
Standard Input Capacity	550 sheets
Connectivity	Ethernet, USB, Wireless
Hard Disk	Option available
Recommended Monthly Page Volume	5, 000 to 50, 000 pages
Network Protocol	TCP/IP, IPv4, IPv6
Printable Area	8.5 x 14 inches
Paper Handling Input, Standard	550 sheets
Paper Handling Output, Standard	250 sheets
Media Types Supported	Card Stock, Envelopes, Paper Labels, Plain Paper, Transparencies
Media Sizes Supported	Letter, Legal, Executive, A4, A5, B5, Envelopes
Standard Ports	USB 2.0, Gigabit Ethernet
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Linux, Mac OS X
Duplex Printing	Standard