- 6 -
LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
1. Application range
This spec sheet is applied to the 22” LED TV used LM91N
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
2) Relative Humidity: 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
4. General Specification
No. Item Specication Remarks
1. Market NON EU
2. Broadcasting system
PAL B/G/DK,/I,
NTSC-M
3.
Available Channel
(Revision 21: 10.12.08)
BAND PAL NTSC China(DK) Australia(BG)
VHF/UHF C1~C69 2~78 VHF/UHF C1~C62 C1~C75
CATV S1~S41 1~71 CATV S1~S41 S2~S44
4. Receiving system Upper Heterodyne
5. CVBS Input (1EA) PAL, SECAM, NTSC 4 System(Rear) :PAL50, SECAM, NTSC, PAL60
6. RGB Input RGB-PC Analog (D-SUB 15Pin)
7. Audio Input (1EA) CVBS L/R Input
To Next Page
Loading...
Need help?
General
