EasyManua.ls Logo

LG 24MT49S User Manual

LG 24MT49S
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
ENG
ENGLISH
10
Specications
Product specications may be changed without prior notice due to upgrade of product functions.
Models
Dimensions (W x H x D) (mm) Weight (kg)
Power consumption
(Outgoing condition)
Power
requirement
With stand Without stand With stand Without stand
24MT49S 556 x 392.7 x 143.4 556 x 345.2 x 54.7 3.5 3.2 25 W 19 V 2.0 A
28MT49S 641.5 x 444.0 x 178.8 641.5 x 396.3 x 59.5 5.0 4.5 28 W 19 V 2.0 A
Wireless module specication
y As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is congured for the regional
frequency table.
y For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the
body.
0197
0197
Wireless LAN module(LGSWFAC71) Specication
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range Output Power(Max.)
2400 to 2483.5 MHz
5150 to 5725 MHz
5725 to 5850 MHz (Not for EU)
13 dBm
16.5 dBm
10 dBm
* "IEEE 802.11ac" is not available in all countries.
Question and Answer IconNeed help?

Do you have a question about the LG 24MT49S and is the answer not in the manual?

LG 24MT49S Specifications

General IconGeneral
3DNo
Color depth8 bit
Color gamut72 %
Pixel pitch0.38175 x 0.38175 mm
Screen shapeFlat
Response time14 ms
Display diagonal24 \
Display resolution1366 x 768 pixels
Display technologyLCD
Native aspect ratio16:9
Peak luminance ratio66 %
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Contrast ratio (dynamic)5000000:1
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Display diagonal (metric)60 cm
Screen format adjustments4:3, 16:9
Digital vertical frequency56 - 75 Hz
Digital horizontal frequency30 - 83 kHz
Display brightness (typical)200 cd/m²
Supported graphics resolutions1366 x 768
Motion interpolation technology-
TV tuner integratedYes
Annual energy consumption33 kWh
Analog signal format systemPAL, SECAM
Digital signal format systemDVB-C, DVB-S2, DVB-T2
RMS rated power10 W
Number of speakers2
Product colorBlack
Mercury content0 mg
Panel mounting interface75 x 75 mm
Video compression formatsDivX
Tuner typeAnalog & digital
Number of OSD languages34
On Screen Display (OSD) languagesALB, BOS, BUL, CRO, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HUN, ITA, KAZ, LAT, LIT, MAC, NOR, POL, POR, RUM, SER, SLK, SLV, SWE, TUR, UKR
HDMI version1.4
DVI-D ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Consumer Electronics Control (CEC)SimpLink
AC input voltage100 - 240 V
Power consumption (standby)0.4 W
Power consumption (typical)23 W
Cables includedAC
Package typeBox
Package depth126 mm
Package width700 mm
Package height402 mm
Package weight4500 g
Quantity per intermodal container (20ft)704 pc(s)
Quantity per intermodal container (40ft, HC)1672 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)143.4 mm
Height (with stand)392.7 mm
Weight (with stand)3500 g
Depth (without stand)54.7 mm
Width (without stand)556 mm
Height (without stand)345.2 mm
Weight (without stand)3200 g

Summary

Lifting and moving the TV

Setting up the TV

Using the joystick button

Basic functions

Explains basic operations like power, volume, and program selection using the joystick.

Mounting on a table

Mounting on a wall

Remote control

Troubleshooting

Cannot control the TV with the remote control

Offers solutions for issues where the TV cannot be controlled by the remote.

No image display and no sound is produced

Addresses problems with no image or sound output from the TV.

The TV turns off suddenly

Provides steps to diagnose why the TV might be turning off unexpectedly.

When connecting to the PC (HDMI), 'No Signal' or 'Invalid Format' is displayed

Solves 'No Signal' or 'Invalid Format' errors when connecting a PC via HDMI.

Related product manuals