EXTERNALEQUIPMENT SETUP
VCRSETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
If the 4:5 picture format is used; the fixed images on the sides of the screen may remain visible on the
screen. This phenomenon is common to all manufacturers and in consequence the manufacturer's warranty
does not cover the product bearing this phenomenon.
x
r_l
z
XD
c
r_l
z
r_l
c
When connecting with an antenna
WallJack
Antenna
O onnect the RF antenna out socket of the VCR to the ANTENNA IN socket on the set.
Connect the antenna cable to the RF antenna in socket of the VCR.
Set VCR output switch to 3 or 4 and then tune TV to the same programme number.
O Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.)
18