WATCHING TV/PROGRAMME CONTROL
N
-r"
z
<
--@
©
>
fT1
N
©
Z
©
AUTO PROGRAMMETUNING
Up to 100 TV stations can be stored in this set by programme num-
bers (0 to 99). Once you have preset the stations, you will be able
to use the PR 4- or - or NUMBER buttons to scan the stations you
programmed. Stations can be tuned using automatic or manual
modes.
A password is required to gain access to Auto programme or Manual
programme menu if the Lock system is turned on.
If you forgot your password, press '7', '7', '7', '7' on the remote con-
trol.
In Australia, if no station name can be assigned to a station, the pro-
gramme number is assigned and stored as ..... followed by a number
see 'Assigning a station name' section to assign the station name.
Pressthe MENU button and then • or • button to
select the SETUP menu.
Pressthe I_ button and then • or • button to select
Auto programme.
Press the I_ button to select Storage from.
Select the beginning programme number with the • or
• button or NUMBER buttons.
Press the I_ button to select To start.
Press the OK button to begin auto programming.
All receivable stations are stored.
To stop auto programming, press the OK button.
When auto programming is completed, the
Programme edit menu appears on the screen. See
the 'Programme Edit' section to edit the stored pro-
gramme.
Press EXIT button to return to normal TV viewing.
36
@
@@
@@
To Next Page
Loading...
Need help?
General
