LG 32LC7D Series User Manual

Screen Setup for PC mode
Overview
This function works in the following mode:
Component1, Component2, RGB-PC, HDMI1/DVI or HDMI2.
Resolution function works only RGB-PC mode.
(1024/1280/1360/1366x768, 60Hz)
Note: Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust
your monitor's position, size and phase manually.
Adjustment for screen Resolution, Position,
Clock and Phase
O ress the OK button and then use A or • button to select
Resolution, Position, Clock, or Phase.
O Press the I_ button and then use A or • or _1 or I_ but-
ton to make appropriate adjustments.
@@@
0
• The Phase adjustment range is -32 ~ +32.
The Phase only works in RGB-PC mode.
• The Clock adjustment range is -_gO ~ +_gO.
The Clock only works in RGB-PC mode.
Pressthe OK button.
Initializing (Reset to original factory values)
To initialize the adjusted values
This function allows you to return to the good picture repro-
duction programmed at the factory and cannot be change.
Resolution This function allows you select
resolution of XGA/WXGA. (Up
to 1366x768, 60Hz)
Position This function is to adjust picture to
left/right and up/down asyou prefer.
Clock This function isto minimize any ver-
tical bars or stripes visible on the
screen background. And the hori-
zontal screen size will also change.
Phase This function allows you to remove
any horizontal noise and clear or
sharpen the image of characters. In
HDMI/DVI-PC mode, PHASE is not
available.
rT1
x
m
_D
z
m
XD
c
m
z
r'M
c
"D
O
O ress the OK button and then use A or • button to select
Reset.
O Press the I_ button and then use _1 or I_ button to select
Yes.
Press the OK button.
@@@
25

LG 32LC7D Series Specifications

General

Brand	LG
Model	32LC7D Series
Category	LCD TV
Language	English