EXTERNALEQUIPMENT SETUP
When connecting with an S-Video cable
m
x
m
z
_>
m
_D
c
m
z
m
--4
C
O Connect the S-VIDEO output of the VCR to the S-VIDEO
input on the set.
O Connect the audio outputs of the VCR to the AUDIO
input jacks on the set.
O Insert a video tape into the VCR and PLAY on the
press
VCR. (Refer to the VCR owner's manual.)
O elect AV1 input source using the INPUT button on
the remote control.
If connected toAV IN 2 input, select AV2 input
source.
2O
To Next Page
Loading...
Need help?
General
