- 6 -
1. Application range
This specification is applied to LP61A chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
(1) Temperature : 25°C±5°C(77±9°F), CST : 40±5
(2) Humidity : 65%±10%
(3) Power : Standard input voltage (AC 100-240V, 50/60Hz)
*Standard Voltage of each products is marked by models
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 20 minutes prior
to the adjustment.
3. Test method
3.1 Performance : LGE TV test method followed
3.2 Demanded other specification
Safety : CE, IEC Specification
EMC : CE, IEC
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
4. General Specification(LCD Module)
5. Feature and Function
No Item Specification Remark
1. Display Screen Device 32”, 37”, 42” wide Color Display Module LCD
2. Aspect Ratio 16:9
3. LCD Module 32”, 37”, 42” TFT WXGA LCD MAKER:AUO/CMO/LPL
4. Operating Environment 1) Temp. : 0 ~ 40 deg LGE SPEC
2) Humidity : 0 ~ 85%
5. Storage Environment 3) Temp. : -20 ~ 60 deg
4) Humidity : 0 ~ 85 %
6. Input Voltage 100 - 240V~, 50/60Hz
7. Power Consumption Power on/off :
≤
max 160W (32") Volume: 1/8 volume of sound distortion point
(Green)
≤
max 190W (37")
St-By(Red) : 1.0 W (26",32")
No Item Specification Remark
1. RF Input 1 1 Tuner
(PAL BG/I/DK, SECAM-L)
SCART 1 FULL(CVBS/L/R,1H-RGB/L/R,TV_OUT) Rear
Input/Output 1 HALF(CVBS/L/R,S-VHS,MNT_OUT) Rear
AV Input 2 CVBS/L/R, S-VHS(S-VHS Priority) Rear and Side
Audio Out(R/L) 1 Variable Audio Out Rear
Component Input 1 480i /576i/480p/576p/720p/1080i Rear
RGB Input 1 RGB-PC : Up to WXGA 60Hz Rear
RGB-DTV : 480p/576p/720p/1080i
HDMI Input 1 HDMI-DTV : Rear
480i/576i/480p/576p/720p/1080i
RS-232C 1 Remote Control Rear
IR Input 1 Wired IR Rear
To Next Page
Loading...
Need help?
General
