97
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
Contrast
Adjusts the signal level between black and white in the picture. You may use Contrast when the bright
part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Colour Temp.
Adjust to left direction to make a picture reddish or adjust to right direction to make a picture bluish.
It is not available to use this function in “Intelligent Sensor” (Only 32/42/46/52/60LD5
***
, 32LE3
***
,
32/37/42LE4
***
, 32/37/42/47/55LE5
***
).
•
Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• Benefits of using Backlight
- The electricity consumption is reduced by
up to 60 %.
- The black brightness is reduced. (As the
black has greater depth, you can enjoy a
better quality definition.)
- You can adjust brightness with maintaining
original signal resolution.
NOTE
► You cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.
► When the Expert 1/2 is selected, you can select Backlight, Contrast, Brightness,
H Sharpness, V
Sharpness
, Colour or Tint.
1
Select PICTURE.
2
Select Picture Mode.
3
Select Vivid, Standard, Cinema,
Sport or Game.
4
Select Backlight, Contrast,
Brightness, Sharpness, Colour,
Tint or
Colour Temp.
.
5
Make appropriate adjustments.
OK
Move
● Aspect Ratio : 16:9
● Picture Wizard
● Energy Saving : Off
● Picture Mode : Standard
• Backlight 70
• Contrast 100
• Brightness 50
To Next Page
Loading...
Need help?
General
Weight and Dimensions
