To Next Page

To Previous Page

ENGLISH

NOTE

• To use these features, an account (ID/PASSWORD) for webOS Signage developer website (http://webossignage.

developer.lge.com/) is required.

[Server Setting]

[Ez Setting] [Server Setting]

Set up to connect your signage to a SuperSign server.

• CMS Server

• Control Server

[Fail Over]

[Ez Setting] [Fail Over]

Set the priority of the input devices when a fault occurs. Automatically play the content stored in the device or run the

set app.

• [On/Off]: Turns [Fail Over] on or off.

• [Input Priority]: Set the priority of input sources for fail over.

• [Backup via storage]: When there is no input signal, this feature automatically plays the content stored in the device

or runs the set app. When set to [On], [Auto], [Manual], [SuperSign Contents] items are

activated.

- [Auto]: When the automatic input switches due to taking screenshots of an image or video that is playing at

regular intervals, this feature will play back the file. (OLED model is not supported.)

>- Capture time Interval: The time interval can be set to 30 min, 1 hour, 2 hours and 3 hours.

- [Manual]: When the automatic input switches due to the image and video file being uploaded, the feature will play

back the file.

>- [Backup media select]: Using the settings button, you can upload a single file in the internal / external memory.

>- [Preview]: You can preview the uploaded file.

- [SuperSign Contents]: When the automatic input switches, this feature will play the file(s) distributed in SuperSign

CMS.

• [reset]: Reset to initial settings.

LG 32SM5E User Manual

Other manuals for LG 32SM5E