7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Parts and buttons
Screen Buttons
Description
Turns the power on or off.
AUTO/SET Displays the current signal and mode.
Press this button to adjust the screen automatically (available only in RGB mode)
Adjusts the volume level.
Adjust the up and down.
MENU Accesses the main menus, or saves your input and exits the menus.
INPUT Changes the input source.
IR Receiver This is where the unit receives signals from the remote control.
Power Indicator Turns red when the monitor is turned on; blinks red when it is in Energy Saving mode.
Connection panel
Screen Buttons
You can set the Power indicator to on or off by selecting OPTION in the main menu.
NOTE
Power Indicator
LED On : Power is on
LED Off: Power is off
To Next Page
Loading...
Need help?
General
