What to do if HDMI 1, HDMI 2, HDMI 3 and PC Inputs show “No Signal” on LG TV?
If HDMI 1, HDMI 2, HDMI 3 and PC Inputs show “No Signal” on your LG TV, ensure the signal generator is OK. Also, check if the EEPROM is correct (re-write if necessary). Check U9058 Vcc & path to U1 and the path to U1. Finally, try downloading the firmware again.
What to do if Component 1, Component 2, AV1 and AV2 Inputs show 'No Signal' on LG TV?
If Component 1, Component 2, AV1 and AV2 Inputs show 'No Signal' on your LG TV, first, make sure the signal generator is OK. Then, check U17 Vcc & Signal Path, the path from U17 to U1, and the path from the connector to U1. If the issue persists, try downloading the firmware again or changing U1.
General| Screen Size | 37 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LCD |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Weight | 20.5 kg |
| Dimensions (W x H x D) | 90.1 x 59.9 x 9.5 cm |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Viewing Angle | 178° |
| Sound Output | 10W x 2 |
| Input Ports | Component, Composite |
To Next Page
