ENGLISH
18
MAKING CONNECTIONS
MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs,
audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external
device’s connection, refer to the manual provided with each device.
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV
through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the
connected device.
The external device connections shown may differ slightly from illustrations in this manual.
Connect external devices to the TV regardless about the order of the TV port.
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
Refer to the external equipment’s manual for operating instructions.
NOTE
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from
the actual items and a RF cable is optional.
UHF Antenna
Antenna
Terminal
Coaxial (75Ω)
or
(*Not Provided)
Coaxial (75Ω)
(*Not Provided)
Wall Jack
Make sure not to bend the copper wire of the RF
cable.
Copper wire
Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
CAUTION
To improve the picture quality in a poor signal area,
please purchase a signal amplifier and install it
properly.
Use a signal splitter to use more than 2 TVs.
If the antenna is not installed properly, contact your
dealer for assistance.
DTV Audio Supported Codec: MPEG
NOTE
To Next Page
Loading...
Need help?
General
