10
ASSEMBLY AND PREPARATION
ENGLISH
Connecting IR & Light Sensor
When you connect the cable to the product,
the feature for receiving remote control signals
is activated. The IR & light sensor is magnetic.
Attach it to the front edge of the product for use.
[Front]
Portrait Layout
When installing in a portrait layout, rotate the
monitor counterclockwise 90 degrees (when
facing the screen).
The Kensington security system connector is
located at the back of the monitor. For more
information on installation and use of this
system, refer to the manual provided with the
Kensington security system or visit
http://www.
kensington.com
.
Connect the Kensington security system cable
between the monitor and a table.
• The Kensington security system is optional.
You can obtain additional accessories from
most electronics retail stores.
Using Kensington Lock
NOTE
To Next Page
Loading...
Need help?
General
