LG 42LS53A User Manual

13
REMOTE CONTROL
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this
manual carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
and terminals to
the labels inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the
actual accessories.
(POWER)
Turns the monitor on or off.
MONITOR ON
Turns the monitor on.
MONITOR OFF
Turns the monitor off.
1/a/A Button
Toggles between numerical and
alphabetical.
(Depending on the model, this
feature may not be supported.)
ENERGY SAVING( )
Adjusts the brightness of
the picture to reduce energy
consumption.
INPUT
Selects the input mode.
3D
This model does not support
this.
Number and Alphabet
buttons
Enters numerical or
alphabetical characters
depending on the setting.
(Depending on the model, this
feature may not be supported.)
CLEAR
Deletes the entered numerical
or alphabetical character.
(Depending on the model, this
feature may not be supported.)
PSM
Selects the Picture Mode.
MUTE
Mutes all sounds.
ARC
Selects the Aspect Ratio
mode.
Volume Up/Down
Button
Adjusts the volume.
BRIGHTNESS Button
Adjusts the brightness of the
display. PAGE Function is not
supported in the this model.
(Depending on the model, this
feature may not be supported.)
• Do not mix old and new batteries, as this
may damage the remote control.
• Be sure to point the remote control toward
the remote control sensor on the monitor.
CAUTION
ID
BACK
TILE
ON
OFF
EXIT

LG 42LS53A Specifications

General

Brand	LG
Model	42LS53A
Category	Digital Signage
Language	English