9
ENG
ENGLISH
Tile Mode
You can configure the integrated screen in the same way as each screen is configured.
To use this function
- Must be used with multiple monitors.
- Must be operated after connecting the monitors using DP Cable and distributor.
- Tile mode: row x column (r = 1 to 15, c = 1 to 15)
- 15 x 15 available
Row (1-15)
Set the number of Tile rows.
Column (1-15)
Set the number of Tile columns.
Tile ID (1-225)
Set an ID for the Tile.
The ID you selected will be displayed on the screen.
Natural
For more natural display, the image is partly omitted to account for the distance between the screens.
Reset
Resets the Tile Mode option.
If you select Tile Reset, all Tile settings are reset and the screen returns to the Full Screen Mode.
NOTE
If Tile Mode is enabled, Smart Energy Saving will be disabled to provide the same picture quality as other
displays.
To Next Page
Loading...
Need help?
General
