1
Connect the HDMI output of the external equipment
(digital set-top box, DVD, etc.) to
HHDDMMII//DDVVII IINN11
(or
HHDDMMII//DDVVII IINN
),
HHDDMMII IINN 22
(Except for
42/50PJ1**, 42/50PJ2** )
or
HHDDMMII IINN 33
(Only
50/60PK5
**
, 50PK7
**
)
jack on the TV.
Turn on the external equipment.
(
Refer to the external equipment's manual for operat-
ing instructions.)
Select
HHDDMMII11
(or
HHDDMMII
)
,
HHDDMMII22
(Except for
42/50PJ1**, 42/50PJ2** )
or
HHDDMMII33
(Only 50/60PK5
**
,
50PK7
**
)
input source using the
IINNPPUUTT
button on the
remote control.
2
3
1
2
GG
The TV can receive video and audio signals simultaneously
when using an HDMI cable.
GG
If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.
GG
Check that your HDMI cable is High Speed HDMI Cable. If
the HDMI cables are not High Speed HDMI Cable, flickering
or no screen display can result. Please use the High Speed
HDMI Cable.
NOTE
CONNECTING WITH AN HDMI TO DVI CABLE
1
2
Connect the digital set-top box or the DVI output of
the PC to
HHDDMMII//DDVVII IINN 11
(or
HHDDMMII//DDVVII IINN
)
jack
on the TV.
Connect the audio output of the digital set-top box or
the PC audio output to the
AAUUDDIIOO IINN ((RRGGBB//DDVVII))
(
or
AAUUDDIIOO IINN ((DDVVII))
)
jack on the TV.
Turn on the digital set-top box or the PC and the TV.
(
Refer to the digital set-top box or the PC manual for
operating instructions.)
Select
HHDDMMII11
(or
HHDDMMII
) input source using the
IINNPPUUTT
button on the remote control.
2
3
4
1
or
To Next Page
Loading...
Need help?
General
