To Next Page

To Previous Page

WATCHING TV / PROGRAMME CONTROL

TURNING ON THE TV

Firstly, connect the power cord correctly.

At this stage, the TV switches to standby mode.

In standby mode to turn TV on, press the

/ I, INPUT or P button on the TV or press the POWER, INPUT, P

or NUMBER button on the remote control and the TV will switch on.

- When your TV is turned on, you will be able to use its features.

PROGRAMME SELECTION

Press the

or NUMBER buttons to select a programme

number.

VOLUME ADJUSTMENT

Press the

button to adjust the volume.

If you wish to switch the sound off, press the MUTE button.

You can cancel this function by pressing the MUTE,

or AV Mode button.

INITIALIZING SETUP

Note:

a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.

b. Press the BACK button to change the current OSD to the previous OSD.

c. For those countries without confirmed DTV broadcasting standards, some DTV features might not

work, depending on the DTV broadcasting environment.

d. "Home Use” mode is the optimal setting for home environments, and is the TV's default mode.

e. "Store Demo" mode is the optimal setting for store environments. If a user modifies image quality

data, “Store Demo” mode initializes the product to the image quality set by us after a certain period

of time.

f. The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION

menu.

g. When France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’.

If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the

LLaanngguuaaggee

MMooddee SSeettttiinngg

CCoouunnttrryy

SSeett PPaasssswwoorrdd

(When France is selected for Country),

AAuuttoo TTuunniinngg

Other manuals for LG 42PJ250

Questions and Answers:

Need help?

Do you have a question about the LG 42PJ250 and is the answer not in the manual?

General