Sets Teletext language.
In Digital Mode Only
To Set Teletext Language
Use the Teletext language function when two or more Teletext languages are broadcast.
In Digital Mode Only
If Teletext data in a selected language is not broadcast, the default language will be
displayed.
If you select the wrong local country, teletext may not appear correctly on the screen and
some problems may occur during teletext operation.
To Use Digital Teletext
The TV gives you access to digital teletext which gives much better text, graphics etc.
than older analogue teletext. This digital teletext can access special and specific
services which broadcast digital teletext.
Some models may not be supported.
Digital Teletext service is made by MHEG.
When Broadcasters recently make the MHEG contents, they programme so that the
button on the remote control can access the Digital Teletext. You can also press the
button on the remote control and select TEXT to access the Digital Teletext.
While using this service, navigation keys and the Wheel (OK) button may be disabled if the
Magic Remote’s pointer is activated on the screen. In this case, press the / , /
keys in order to deactivate the pointer. (This only applies to models that support the Magic
Remote.)
Teletext within digital service
Press the button on the remote control.01
Select General Language Primary Teletext Language / Secondary
Teletext Language.
02
Press the button on the remote control.01
Select TEXT.02
Press the numeric or (Programmes) / button to select a certain service
which broadcasts digital teletext.
01
To Next Page
Loading...
Need help?
General
Weight and Dimensions
