LG 50PJ350R-TA User Manual

3
EXTERNAL EQUIPMENT SETUP
1
CONNECTIING WITH A COMPONENT CABLE
CONNECTING WITH AN HDMI CABLE
2
!
?
NOTE
►Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t support HDMI version
1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI
version 1.3.
► HDMI mode supports PCM audio format only.
► Audio format was reseted to Dolby/DTS/Bitstrem in DVD Player or STB, it should be changed to PCM.
► We recommed using under 10m of the HDMI cable. When using over the length, connect a amplifier
or repeater.
► If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
1
Connect the HDMI output of the external equip-
ment (digital set-top box, DVD, etc.) to HDMI/DVI
IN 1(DVI), HDMI IN 2 or HDMI IN 3 (Except for
42/50PJ2***) jack on the TV.
2
Turn on the external equipment.
3
Select HDMI1, HDMI2 or HDMI3 (Except for
42/50PJ2***) input source using the INPUT but-
ton on the remote control.

LG 50PJ350R-TA Specifications

General

Brand	LG
Model	50PJ350R-TA
Category	Plasma TV
Language	English