20
Fall 2009 1080P Plasma 50PS60
USB Download
1) Open the USB Flash Drive.
5) Cursor left and highlight ‘START’ Button and
push ‘Enter’ button using the remote control.
6) You can see the download progress Bar.
7)
Do not unplug until unit has automatically restarted.
8) When download is completed,
you will see “COMPLETE”.
9) Your TV will be restarted automatically.
※CAUTION:
Do not remove AC power or the USB Flash Drive.
Do not turn off Power, during the upgrade process.
2) Copy new software (xxx.bin) to Root.
Make sure to have correct software file.
3) With TV turned on, insert USB flash drive.
4) You can see the message “
TV Software Upgrade”
Shows the
Currently Installed
Version
Shows the
Software Version
found on the USB
Flash Drive
Shows the
Software file
found on the USB
Flash Drive
To Next Page
Loading...
Need help?
General
