ENGLISH
11
Power
General Power
Power-related feature settings
No Signal Power Off (15 Min)
Set whether to use the 15 Min Auto Off feature.
• You can set this option to On or Off.
• If you set this feature to On, the product turns off when it has remained in No Signal status for 15 minutes.
• If you set this feature to Off, the 15 Min Force Off feature is disabled.
• It is recommended that you set this feature to Off if you intend to use the product for long periods of time as the
feature turns the power of the product off.
No IR Power Off (4hour)
Set whether to use 4 Hours Off feature.
• You can set this option to On or Off.
• If you set this feature to On the product turns off if there is no input from the remote control for 4 hours.
• If you set this feature to Off, the 4 Hours Off feature is disabled.
• It is recommended that you set this feature to Off if you intend to use the product for long periods of time as the
feature turns the power of the product off.
DPM
Set the Display Power Management (DPM) mode.
• If this feature is not set to Off, the monitor will enter DPM mode when there is no input signal.
• If you set this feature to Off, DPM is disabled.
DPM Wake Up Control
Turns on the set according to the digital signal processing of the connected DVI-D/HDMI port.
• Clock, the set only checks for digital clock signals and turns on once it finds the clock signal.
• Clock+DATA, the set turns on if the digital clock and data signals are both input.
To Next Page
Loading...
Need help?
General
