125
PICTURE CONTROL
OK
Move
SIMPLINK : On
Key Lock : Off
Simple Manual
Set ID : 1
ISM Method : Normal
Demo Mode : On
Mode Setting : Store Demo
Factory Reset
OPTION
E
OK
Move
SIMPLINK : On
Key Lock : Off
Simple Manual
Set ID : 1
ISM Method : Normal
Demo Mode : On
Mode Setting : Store Demo
Factory Reset
OPTION
E
4
IMAGE STICKING MINIMIZATION (ISM) METHOD
(PLASMA TV ONLY)
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining
even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged peri-
ods.
WWhhiittee WWaasshh
White wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to clear entirely with White Wash.
OOrrbbiitteerr
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the
screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
CCoolloouurr WWaasshh
The colour block with the screen moved a little and the white pattern are alternately displayed. It is difficult to
sense the afterimage occurred while the temporary afterimage is removed and the colour pattern is operating.
Select
OOPPTTIIOONN
.
Select
IISSMM MMeetthhoodd
.
Select
NNoorrmmaall,, OOrrbbiitteerr,, CCoolloouurr WWaasshh
or
WWhhiittee WWaasshh..
Sa
ve.
ISM Method : Normal ISM Method : Normal
Normal
Orbiter
Colour Wash
White Wash
Normal
• If you do not need this function, set
NNoorrmmaall..
1
To Next Page
Loading...
Need help?
General
