LG BP320 User Manual

Connecting20
Connecting
2
Connecting to your
home network
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel or
the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and online
content services.
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
y
When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
y
Do not connect a modular phone cable to
the LAN port.
y
Since there are various connection
congurations, please follow the
specications of your telecommunication
carrier or internet service provider.
y
If you want to access content from DLNA
servers, this player must be connected to
the same local area network with them via a
router.
y
To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC.
(see page 55)
,
Note
Rear of the unit
Router
Broadband
service
DLNA certied servers
Wired network setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.

LG BP320 Specifications

General

Depth	198.1 mm
Width	429.3 mm
Height	40.64 mm
Weight	1814 g
Full HD	Yes
Device type	Blu-Ray player
HDMI version	1.4a
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS 2.0
Package weight	2631 g
Cables included	AV
AC input voltage	120 V
AC input frequency	60 Hz
Disc types supported	BD, BD-R, BD-RE, BD-ROM, CD, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-ROM, DVD-RW
Playback disc formats	Blu-Ray video, CD audio
Supported video modes	1080p
Card reader integrated	No
USB 2.0 ports quantity	1
Audio formats supported	AAC, LPCM, MP3, WMA
Video formats supported	3GP, FLV, M4V, MKV, MPEG2, MPEG4, VOB, WMV
Digital audio coaxial out	-
Power consumption (standby)	0.5 W
Power consumption (typical)	11 W
Audio output channels	- channels