LG BP320 User Manual

6 Appendix
Appendix52
Appendix
6
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing You can
1
(TV POWER) Turn the TV on or o.
PR/CH +/–
Scan up or down through
memorized channels.
VOL +/– Adjust the volume of the TV
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
,
Note
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down
1
(TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the table
below).
Manufacturer Code Number
LG 1(Default), 2
Zenith 1, 3, 4
GoldStar 1, 2
Samsung 6, 7
Sony 8, 9
Hitachi 4
2. Release the
1
(TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the battery
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.

LG BP320 Specifications

General

Depth	198.1 mm
Width	429.3 mm
Height	40.64 mm
Weight	1814 g
Full HD	Yes
Device type	Blu-Ray player
HDMI version	1.4a
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS 2.0
Package weight	2631 g
Cables included	AV
AC input voltage	120 V
AC input frequency	60 Hz
Disc types supported	BD, BD-R, BD-RE, BD-ROM, CD, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-ROM, DVD-RW
Playback disc formats	Blu-Ray video, CD audio
Supported video modes	1080p
Card reader integrated	No
USB 2.0 ports quantity	1
Audio formats supported	AAC, LPCM, MP3, WMA
Video formats supported	3GP, FLV, M4V, MKV, MPEG2, MPEG4, VOB, WMV
Digital audio coaxial out	-
Power consumption (standby)	0.5 W
Power consumption (typical)	11 W
Audio output channels	- channels