LG BP320 User Manual

3 System Setting
System Setting26
System Setting
3
Settings
Initial setup
When you turn on the unit for the rst time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press
1
(POWER).
The initial setup wizard appears on the screen.
2. Use
w/s/a/d
to select a display language
and press ENTER (
b
).
3. Read and prepare the preparations for the
network settings and then press ENTER (
b
)
while [Start] is highlighted.
If wired network is connected, the network
connection setting will automatically be
finished.
4. All available networks are displayed on the
screen. Use
w/s
to select [Wired Network]
or desired SSID of wireless network and press
ENTER (
b
).
If you have security on your access point, you
need to input the security code as necessary.
5. Use
w/s/a/d
to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
6. Select [Next] and press ENTER (
b
) to apply
network settings.
Network connection status is displayed on the
screen.
For details on network settings, refer to
“Connecting to your Home Network” on page
20.
7. Check all the settings that you have set in the
previous steps.
Press ENTER (
b
) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use
a/d
to select
[Previous] and press ENTER (
b
).

LG BP320 Specifications

General

Depth	198.1 mm
Width	429.3 mm
Height	40.64 mm
Weight	1814 g
Full HD	Yes
Device type	Blu-Ray player
HDMI version	1.4a
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS 2.0
Package weight	2631 g
Cables included	AV
AC input voltage	120 V
AC input frequency	60 Hz
Disc types supported	BD, BD-R, BD-RE, BD-ROM, CD, CD-R, CD-ROM, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-ROM, DVD-RW
Playback disc formats	Blu-Ray video, CD audio
Supported video modes	1080p
Card reader integrated	No
USB 2.0 ports quantity	1
Audio formats supported	AAC, LPCM, MP3, WMA
Video formats supported	3GP, FLV, M4V, MKV, MPEG2, MPEG4, VOB, WMV
Digital audio coaxial out	-
Power consumption (standby)	0.5 W
Power consumption (typical)	11 W
Audio output channels	- channels