LG BX503 User Manual

Function
30
1. Press the MENU button and then use , button to select the menu.
2. The used lamp time is displayed.
l When projector lamp is reaching the end of its life, the lamp indicator will turn
red. (Refer to the page 10.)
l The lamp warning LED illuminates red continuously in the case of excessive
lamp time.
l Press the MENU button twice or the EXIT button to exit the menu screen.
Checking lamp time
1. Press the STILL button of remote control.
* You can freeze the input image.
2. To exit STILL, press any button .
* The STILL function will release automatically after approximately 10 minutes.
Using Still Function
<Moving Image>
<Still Image>
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Monitor Out item.
3. Press the
, button to select RGB1, RGB2 or Auto.
l
Press the MENU button twice or the EXIT button to exit the menu screen.
l
Auto mode is the mode to output an image of currently seeing input among
RGB1 or RGB2 input.
Using Monitor out Function
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time 11 Hr
Black
High bright
RGB1
MENU Prev. Move Select
Keystone
Blank Image
Captured Image
Lamp mode
Monitor Out
Lamp time 11 Hr
Black
High bright
RGB1
* You can select either of the two RGB inputs.
MENU Exit Move OK

LG BX503 Specifications

General

Brand	LG
Model	BX503
Category	Projector
Language	English