LG DLGX5171W User Manual

11
1. Thermal cut off Measure resistance of terminal
to terminal
Open at 284
41°F
(140
5°C)
Auto reset -31°F (-35°C)
Same shape as Outlet Thermostat.
If thermal fuse is open must
be replace
Resistance value
Continuity (250°F ) < 1
Ω
• Heater case-
Safety
• Electric type
• Heater case -
Hi limit
• Electric type
• Blow housing -
Safety
• Electric type
Measure resistance of terminal
to terminal
Open at 257
9°F
(125
5°C)
Close at 221
9°F
(94
7°C)
Measure resistance of terminal
to terminal
Open at 185
41°F
(85
5°C)
Close at 167
41°F
(75
5°C)
Same shape as Thermal cut off.
Measure resistance of terminal
to terminal
Resistance value
Resistance value < 5
Ω
Resistance value
Resistance value < 5
Ω
Resistance value < 1 Ω
Resistance value
Resistance value
Resistance value < 1
Ω
Resistance value:
80
Ω ~ 100 Ω
1. lever open
Resistance value < 1
Ω
2. Lever push (close)
Resistance value
• Check Top Marking:
N140
2.Hi limit Thermostat
(Auto reset)
3.Outlet Thermostat
( Auto reset)
• Check Top Marking:
N85
4. Lamp holder
5. Door switch
Measure resistance of the
following terminal
1) Door switch knob: open
Terminal: COM - NC(1-3)
Terminal: COM - NC (1-2)
2) Door switch push: push
Terminal: COM - NC (1-3)
Terminal: COM - NC (1-2)
6. Idler switch
Measure resistance of the
following terminal:
COM - NC
!
CAUTION
5
COMPONENT TESTING INFORMATION
When checking the Component, be sure to turn the power off, and do voltage discharge sufficiently.
Component Test Procedure Check result Remark

LG DLGX5171W Specifications

General

Brand	LG
Model	DLGX5171W
Category	Dryer
Language	English