TEST OPERATION
9
Connect the power plug to
the outlet. In case of Coloreds program.
Connect the inlet hose.
Preparation Press the POWER button. Press
the
Start/Pause
for button.
washing.
·Check if the drum rotates ·Check if water is supplied
clockwise and counterclockwise.
through the detergent dispenser.
·Power off and then power on.
·Check if the door can be
opened after 3 minutes.
·Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
·Check drain and spin.
·Press the Rinse+Medic Rinse
button simultaneously and the
present temperature will be
displayed.
·If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating. Check automatic reverse Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
To Next Page
Loading...
Need help?
General
