11
• Use this option to prevent unwanted
use of the washer. Press and hold
Crease Care and Medic Rinse button
for 3 seconds to lock/unlock control.
• When Child lock is set, CHILD LOCK
lights and all buttons are disabled
except the Power button. You can
lock the washer while it is operating.
• The Beep on/off function can be set by pressing
and holding the Option and Rinse button
simultaneouly.
• Select a water temperature based
on the type of load you are
washing.
• By pressing the Rinse button, the
Rinse type can be selected.
Display the estimated remaining time (Hour : Minute)
to finish.
In case of abnormal operation, error indications are
displayed.
( )
See troubleshooting guide.
• To change the spin speed, turn the
Spin knob to cycle through available
options.
Child Lock
LED display
Spin Selector knob
• Tub Clean course can be set by
pressing and holding Intensive
and Pre Wash button
simultaneously.
• Tub Clean is special cycle to
clean the inside of the washer.
Tub Clean
Beep on/off
Rinse, Temp. Button
To Next Page
Loading...
Need help?
General
