21
OPERATING YOUR WASHER
OPERATING YOUR WASHER
NOTE
• When the card balance is not enough, machine dis-
plays the card balance for 5 seconds and then displays
message repetitively
NOTE
• The machine will not start until sufficient coins are
inserted.
❋
Do not work any button and stop the washer
(When the washer is operating) or (when a cycle is in
progress)
1. Ready mode
1) Coin / Card type
– The cycle LEDs flash at the same time, when the
price of cycles are equal.
2) OPL type
– The cycle LEDs is lit at the same time, and displayed
‘PUSH’.
4. Add super wash
Wash time or rinse cycle can be added when additional
coin is inserted or a valid cash card is entered.
5. Change course
You cannot change the course while the machine is
running.
6 . Cycle finish
The machine stops and LED display shows “ ”
with beeper sound.
2. Insert card/coin (not for OPL type)
Insert a cash card that has a sufficient balance.
The card balance should be more than the programmed
vend price for a selected cycle.
3. Select the cycle
Press the desired button and press the start button.
The display LED will show the remaining time and the
selected cycle starts.
• Select cycles designed for different types of fabric and soil
levels.
• Insert a sufficient amount of change that is more than
the programmed vend price for the selected cycle.
CYCLE Fabric type
Wash/Rinse
Temp.
Whites
Cotton, linen, towels, shirts,
sheets
Hot/Cold
Colors
Mixed loads, work clothes,
jeans, shirts
Warm/ Cold
Perm.Press
Dress shirts, pants, wrinkle-
free clothing, cotton/poly blend
clothing, tablecloths
Warm/ Cold
Delicates
Dress shirts, blouses, nylons,
sheer or lacey garments
Cold/ Cold
WARNING
• To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUC-
TIONS before operating this appliance.
To Next Page
Loading...
Need help?
General
