39
PROGRAMMING MODE - SETUP MODE
Entering set up mode.
You will see LqC1
Button Display
Press the
Whites
button.
Press the
Colors
or the
Perm.Press
button until
appears in the display.
Press the
START
button.
Press the
Colors
or the
Perm.Press
button until
appears in the display.
Press the
START
button.
Display
.
Press the
Colors
or the
Perm.Press
button until
appears in the display.
Press the
START
button.
Press
Colors
or
Perm.Press
button and then select
or
.
Coin type
Card type
One or the other will
display.
1.Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Whites button twice.
11-4. Vend type setup - card type or coin type setup
NOTE
• After setting the Value to VEND, vend type is changed directly without power on/off (Sense dry) is not available
in washer