Operating 15
Operating
3
[USB] Only in CD, FM tuner, and
Bluetooth Handsfree, recording is
available.
[SD] Only in CD, recording is
available.
Do not remove the USB device /
SD card during recording, or an
incomplete le may be made and
not deleted on PC.
When USB device/ SD card
memory is full, "MEMORY FULL"
displays and stops recording.
While FM tuner recording, the
broadcastings are recorded as a le
every 20 minutes.
You can adjust the recording
speed.
(Refer to the page 12.)
When you record all tracks on the
audio CD, "REC" appears.
When you record all MP3/ WMA
les in the folder, "REC
"appears.
,
Note
12.)
Respect copyrights
Listening to music by
connecting iPod/iPhone
You can enjoy iPod / iPhone-stored music
on the unit by connecting it to the USB
connector using the appropriate cable.
1. Open the USB cover.
2. Connect the iPod / iPhone.
3. Press SRC to select a source to USB.
Pausing or restarting
playback
1. Press
T
on the unit to pause
playback.
Or press
d/M
on the remote control.
2. Press it to resume playback.
Searching for a section
within a file
[LCS720BO]
During playback, press and hold
Y/
U
and then release at a point you want.
[LCF820BO]
During playback, push and hold
Y/
U
clockwise or counterclockwise on
the unit and then release at a point you
want.
Skipping to another file
[LCS720BO]
Press
Y/U
on the unit.
[LCF820BO]
Push
Y/U
clockwise or
counterclockwise on the unit.
Or press
c
/
v
on the remote
control.
Or
1. Press the volume knob on the unit.
Or press ENTER on the remote control.
2. Rotate the volume knob on the unit to
select a desired category and press it.
Or press
w
/
s
and press ENTER on the
remote control.
3. Rotate the volume knob on the unit to
select a desired file and press it.
Or press
w
/
s
and press ENTER on the
remote control.
Checking information about
your music
MP3 / WMA les often come with tags.
The tag gives the Title, Artist or Album.
Press DISP repeatedly during MP3 / WMA
le playback. If there is no information,
"NO TEXT" will be shown in the display
window.
Playing back files in a way
you want
On the Unit
1. Press FUNC.
2. Rotate the volume knob to select an
item and press it.
3. Rotate the volume knob to select the
option.
4. Press the volume knob to set the
option.
If you want to return to the previous
step, press
.
On the Remote Control
1. Press RPT / SHF.
2. Press it again to cancel.
Or
1. Press FUNC / • MENU.
2. Press
w
/
s
to select an item and press
ENTER.
3. Press
w
/
s
to select the option.
4. Press ENTER to set the option.
If you want to return to the previous
step, press
.