Connecting22
Connecting
2
OPTICAL IN connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the optical output jack of your
component into the OPTICAL IN jack on the unit.
And then select the [OPTICAL] option by pressing
RADIO&INPUT and ENTER (
b
). Or press OPTICAL to
select directly.
You can also use the F (Function) button on the
front panel to select the input mode.
To the digital
optical output jack
of your component
Rear of the unit
HDMI IN connection
You can enjoy the pictures and sound from your
component through this connection.
Connect the HDMI OUT jack of your component
into the HDMI IN jack on this unit. And then select
the [HDMI IN] option by pressing RADIO&INPUT
and ENTER (
b
).
You can also use the F (Function) button on the
front panel to select the input mode.
To the HDMI OUT
jack of connecting
device ( Cable TV
set-top box, digital
satellite TV receiver,
video game
console, and etc)
Rear of the unit
y
You cannot change the video resolution
in the HDMI IN mode. Change the video
resolution of the connected component.
y
If the video output signal is abnormal when
your personal computer is connected to
HDMI IN jack, change the resolution of your
personal computer to 480p, 720p, 1080i or
1080p.
y
The video signal from the HDMI input
cannot be output from the component or
composite video outputs.
y
The player sends audio from the HDMI
inputs to both the HDMI output and to the
unit’s speakers.
,
Note
HB926_ENG.indd 22 11. 03. 04 �� 5:14
To Next Page
Loading...
Need help?
General
