• Adding Leg Stoppers
• Checking leveling
Page 2
Product : Washing Machine
Bulletin # : DFZ201900156-01
Release Date : 11/01/2019
Extended Warranty
This service is covered by an extended warranty Yes No
- If Yes, Parts for ( ) years and Labor for ( ) years by LG.
- If No, Parts and labor are charged to the customer if outside warranty period.
• The warranty period, including any extended warranty above, starts from the original date of purchase.
• The information is available through “https://gsfsplus-america.lge.com” with a valid ID.
• The information is intended tor experienced technicians, not for customer .
• The information is subject to change or update without notice.
• Check for contact
Part Interchangeable: Scrap Current Part in LG Warehouse
Yes No
Current Part New Part
Current Product N/A Yes
New Product N/A Yes
Repair Instructions
2. Make sure the Leg is fully seated in the center of the Leg Stopper.
1. Raise each corner of the machine and set the Leg Stopper
beneath the Leg.
1. Make sure the unit is level and adjust the legs if necessary.
1. Run a test cycle with a large load to
see if the rotor is still contacting the
drain pan. If it still makes contact,
check the suspension.
To Next Page
Loading...
Need help?
General
