Installation8
Installation
2
How to Install
Please read the owner’s manual before installing the Smart Scan installer program.
When you insert the CD you will see 3 icons which are installation of the program, Manual link and ad movie
clip. We recommand to read the manual before installation.
If your computer system is closer to the minimum system requirements, the scanner can scan an A4
size document. If it is closer to the recommended system requirements, the scanner can scan an A3
size document. If you lower the resolution, this will increase the scanned area in the same system.
Tip
1. Connect the mouse scanner to the USB port. Wait until the installation of the driver is complete.
Do not remove the mouse scanner during the installation. If you removed the mouse scanner, connect it to
another port or open the control paneland update the driver.
Install button to display the initial
installation screen.
If you want to check the manual or movie to understand of product. You also can click two icons.
3. The end user license agreement screen will appear. Read the end user license agreement carefully.
If you agree with the agreement, check Yes, then click the Install button.
4. This will initiate the installation. When the Next button is enabled, click the button.
5. Once the installation is complete, the wizard's Finish screen appears.
6. Click the OK
(We recommend you to select the "Start now" check box.)
Check the compatibility with your computer, then click Install.
If user computer is available all the list will be green which is recommanded spec. If your system close to low
spec of computer will be yellow box. If user system is lower than low spec of computer will be red box.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
