LG M2252D User Manual

ENGLISH
12
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
Do not place the TV near or on sources of
heat, as this may result in fire or other damage.
CAUTION
When you adjust the angle, do not hold the
buttom of the TV frame as shown on the
following illustration, as may injure your fingers.
WARNING
Disconnect the power cord first, and then move
or install the TV. Otherwise electric shock may
occur.
CAUTION
10 cm
10 cm
10 cm
10 cm

LG M2252D Specifications

General

3D	No
Pixel pitch	0.248 x 0.248 mm
Aspect ratio	16:9
Display diagonal	21.5 \
Display technology	LED
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (dynamic)	5000000:1
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
Audio system	Infinite Surround
TV tuner integrated	Yes
Analog signal format system	PAL, SECAM
USB hub version	2.0
DVI-D ports quantity	0
Product color	Black
Market positioning	-
RMS rated power	10 W
Number of speakers	2
Tilt angle range	-5 - 20 °
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
Power consumption (standby)	0.3 W
Power consumption (typical)	30 W
Power consumption (PowerSave)	1 W
Package depth	126 mm
Package width	578 mm
Package height	384 mm
Package weight	4900 g

Weight and Dimensions

Depth (with stand)	182.8 mm
Height (with stand)	386.5 mm
Weight (with stand)	3600 g
Depth (without stand)	62.9 mm
Width (without stand)	508.6 mm
Height (without stand)	314.8 mm
Weight (without stand)	3100 g