LG M2252D User Manual

ENGLISH
9
ASSEMBLING AND PREPARING
3
Attach the Stand Base from the Stand Body by
turning the screw to the right with a Coin.
Setting up the TV
Attaching the Stand
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
1
Place the TV with the screen side down on a
flat and cushioned surface.
2
Attach the Stand Body from the TV.

Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.

When attaching the stand to the TV,
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
CAUTION
M2252D M2452D

LG M2252D Specifications

General

3D	No
Pixel pitch	0.248 x 0.248 mm
Aspect ratio	16:9
Display diagonal	21.5 \
Display technology	LED
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Contrast ratio (dynamic)	5000000:1
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
Audio system	Infinite Surround
TV tuner integrated	Yes
Analog signal format system	PAL, SECAM
USB hub version	2.0
DVI-D ports quantity	0
Product color	Black
Market positioning	-
RMS rated power	10 W
Number of speakers	2
Tilt angle range	-5 - 20 °
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
Power consumption (standby)	0.3 W
Power consumption (typical)	30 W
Power consumption (PowerSave)	1 W
Package depth	126 mm
Package width	578 mm
Package height	384 mm
Package weight	4900 g

Weight and Dimensions

Depth (with stand)	182.8 mm
Height (with stand)	386.5 mm
Weight (with stand)	3600 g
Depth (without stand)	62.9 mm
Width (without stand)	508.6 mm
Height (without stand)	314.8 mm
Weight (without stand)	3100 g