In-Call Menu
Your phone provides a number of control
functions that you can use during a call. To
access these functions during a call, press the
left soft key [Options].
During a Call
The menu displayed on the handset screen
during a call is different from the default main
menu displayed when in idle screen, and the
options are described below.
Making a Second Call
You can select a number you wish to dial
from the Address Book to make a second call.
Press the left soft key then select Contacts.
You can also dial a second number by, first,
placing your Active Call on Hold by pressing
the [SEND] Key and then by entering
a second phone number and pressing
[SEND] again to connect.
When the second call is connected, the first
call is automatically placed on hold. You can
swap between calls, by pressing the
[SEND] key.
Swapping Between Two Calls
You can use the following three methods to
switch between two calls.
1.
Press the [SEND] key.
2.
Press the left soft key and then select
Swap.
Answering an Incoming Call
To answer an incoming call when the handset
is ringing, simply press the [SEND] key.
The handset is also able to warn you of an
incoming call while you are already on a call.
A tone sounds in the earpiece, and the display
will show that a second call is waiting. This
feature, known as Call Waiting, is only
available if your network supports it.
If Call Waiting is on, you can put the first
call on hold and answer the second call, by
pressing the
[SEND] key.
To Next Page
Loading...
Need help?
General
