LG PDRCUDB0 User Manual

Special Function
22 Deluxe wired remote controller
2TH
REMO
REMOAUTO INDOOR
ZONE 2 ZONE 3 ZONE 4
ZONE 1 ZONE 2 ZONE 3 ZONE 4
ZONE 1
2TH
REMO
ZONE 1 ZONE 2 ZONE 3 ZONE 4
REMOAUTO INDOOR
ZONE 1 ZONE 2 ZONE 3 ZONE 4
2TH
REMO
REMOAUTO INDOOR
ZONE 1 ZONE 2 ZONE 3 ZONE 4
ZONE 1 ZONE 2 ZONE 3 ZONE 4
ZONE 1 ZONE 2 ZONE 3 ZONE 4
1
If you press button on the remote controller, the
indoor temperature displays for 5 seconds. The display
goes to a previous screen after 5 seconds.
Room temperature value is based on thermistor
setting.
❈ If you connect 2 remote controllers with one indoor unit,
room temperature is based on master remote controller
only. You can distinguish master remote controller by
button image. The master remote controller has 3 more
buttons than slave one
- Test run/E.S.P/Addressing when you push SPECIAL
FUNC. button. Refer to the following fig.1
❈ There would be some difference between actual
temperature you feel and room temperature of remote
controller , because the temperature of the position is
not uniform which the remote controller is located on.
Room Temperature Check
You can control zones when you've installed the zone controller new type.
Zone control function
1
Press
,,.
button.
• A click of the desired zone will turn on/off it's indicator.
ZONE 4
ZONE 3
ZONE 2
ZONE 1
Fig 1. Master remote controller has 3 buttons - Test run/E.S.P/Addressing

LG PDRCUDB0 Specifications

General

Brand	LG
Model	PDRCUDB0
Category	Remote Control
Language	English